Chinese AAC Wall Panel Made in China

Advantages of AAC Wall Panel:

1. Lightweight: Porosity achieve 70% to 85%, volume density is generally 500-900kg/m3, as 1/5 of general concrete brick, the 1/4of clay brick, the 1/3 of hollow brick, and similar with wood can float in water. It can reduce building weight, reduction in the cost of integrated building, moreover, prolong building's life.
2. Fireproof: Most of the major raw materials is inorganic materials, so it has good fire resistance, and do not emit harmful gases when meet fire. Fire 650 degrees, as a refractory material, the thick up of 100 mm walls can reach to 4 hours fire resistance, 300mm thick up wall can reach to 9 hours fire resistance.
3. Sound insulation: Due to a unique porous structure, so it has a sound absorption capacity. The sound absorption capacity can reach of 100mm thick wall up to 41 db.
4. Insulation: As the material inside has a large numbers of the pores and porous, which has a good thermal insulation properties. The Thermal conductivity is 0.11-0.16W/MK, as 1/4-1/5 of brick. Typically, the insulation effect of 20cm thick aerated concrete wall is equivalent to 49cm thick solid brick walls ordinary.
5. Permeability: Result of material by the composition of many independent small pores, the moisture absorption is slow, in the volume of absorbent is 5 times of clay saturation do. When used in the
6. High workability: It has good machinability, can be sawed, planed, drilled, nailed, and available appropriate as bonding of adhesive material, so create favorable conditions for building construction.
7. Economies: An integrated lower cost than using more than 5% of solid clay bricks, and can increase the usable area, greatly enhance the utilization of floor space.

Raw material of aac wall panel :

 

Application of aac wall panel :

Finished AAC block is Suitable for all nonbearing wall and bearing wall of multi-story (less than six-floor), nonbearing wall internal parting wall, thermal insulation rooms front panel, floorslab.
1.Unit weight grade (kg/m3): 500, 600, 700, 800 (means 05,06,07,08 grade)
2.Compression strength grade (Mpa): A3.5, A5.0, A7.5, A10.0 (1Mpa=10kg/m2)
3.Drying shrinkage (mm/m):  ≤ 0.8
4.Heat conductivity(w/m.k): 0.09-0.22
5.Sound-proofing performance(db): 40-47.75

Our factory :

Our factory was founded in 2005, has Rizhao, Wulian two production sites which are located in Rizhao City Economic Development Zone and Wulian stone Industrial Park. Annual production capacity of AAC block is 800,000 cubic meters, for ALC is 300,000 cubic meters. Our factory is the first professional production manufacturer for AAC blocks and ALC in Shandong province.With advanced equipment, the maximum degree of unit investment intensity and highest automation equipment manufacturers in Shandong province, with the country's top technology team ,the most advanced technology manufacturers, our factory has developed and stable production of B03, B04, B05, B06 levels AAC block insulation, high cold regions frost block, a special high-performance parts impermeability block, has accumulated a lot of valuable experience in field applications.
By our constant pursuit of innovative technologies and management systems,we have gotten the ISO certificate and CODEMARK in Australia in 2013.And in 2014 we also have gotten the special certificate from Singapore .
"new technology to create new life" concept is our spirit. With high-quality products, excellent technology, excellent service, our factory welcome universal guests call, to create greater value for the community and assist you for the profit.

Any further information pls be kind to conctact with Alina at +86 18754957965 Looking forward to your kind inquiry and visiting us.


Name:alina
Mob:+86 18754957965